Facing Centering 1050
Features
- Roller Type Guideways
- Ground Ballscrew with Double Nuts
- FEM Analyzed Machine Structure
- Operator Friendly Design
- Vibration Free Structure
- Elegant Look of Machine
Technical Specifications
Capacity
| Max. Facing Diameter | mm | 100 |
| Max. Drilling Diameter | mm | 25 |
| Component Leoglh | mm | 150 to 500 |
| Drilling Slide Rapid Rate | m/min. | 25 |
| Milling Slide Rapid Rate | m/min | 25 |
Spindle
| Spindle Nose | – | BT40 |
| A.C Induction Spindle motor power – 2 Nos. | kw | 5.5 |
| Nos. of Spindles | 4 | |
| Milling Spindle Speed | rpm | 500-2000 |
| Drilling Spindle Speed | 500-2000 |
Axis
| Nos. of Axiz | Nos. | 4 |
| Servo Motor | Nm | 8 |
| LM Type Guideways (Drilling) | mm | 45 |
| LM Guideways (Milling) | mm | 35 |
| Ballscrew | mm | 32 |
Accuracy
| Positioning Accuracy | mm | 0.015 |
| Repeatability | mm | ±0.005 |
| Controller | Siemens 808D Advance |
Standard Accessories
- Servo Motor With Incremental Encoder
- Cartridge Type Spindle
- Hydraulic Powerpack With 1.5 HP Motor
- Centralized And Programmable Lubrication
- Self Centering Type Clamping Device
- Auto Coolant
Optional Accessories
- Auto Door
- Patrol Light
- Stabilizer
- Chip Conveyor
- All Possible Customization
Control System Accessories
- RS-232 Serial Interface Port
- Feed Rate Override
- Manual Data Input
- 2 Axis Simultaneous
- Circular Interpolation
- Thread Cutting Cycle
- Electronic Hand Wheel
- Constant Surface Speed Control
- Part Programming Storage and Editing
- Direct Drawing Dimension Programmimg