Linear 8020

Features

  • Roller Guideway
  • Ground Ballscrew with Double Nuts
  • FEM Analyzed Machine Structure
  • Operator Friendly Design
  • Vibration Free Structure
  • Elegant Look of Machine
Watch Video
Download Brochure
Ask for Information

Technical Specifications

Capacity
Swing Over Bed mm 400
Std Turning Dia. mm 80
Max. Turning Dia.
With Limited Length		 mm 120
Max. Turning Length (Std. Chuck Face to Tool Disk Face) mm 200
Cross (X Axis) Travel mm 280
Longitudinal (Z Axis) Travel mm 200
Rapid (X & Z Axis) m/min 25
Slide
Ball Screw (Z Axis) mm 25 x 10
LM Guide (Z Axis) mm 25
Ball Screw (X Axis) mm 25 x 10
LM Guide (X Axis) mm 25
Spindle
Spindle Motor Power
(30 Min./Cont) (Siemens		 kW  5.5/3.7
Spindle Motor Power
(30 Min./Cont) (Fanuc)		 kW   5.5/3.7
Spindle Bore mm 40
Spindle Nose A2-4
Chuck Size mm 165
Max. Bar Capacity mm 28
Spindle Speed Range RPM 50-4000
Full Power Speed Range RPM –
Fanuc Torque (Cont.) Nm 26.55
Fanuc Torque upto (Max.) Nm 78.75
Siemens Torque (Cont.) Nm 35.25
Siemens Torque upto (Max.) Nm 70.5
TURRET
No. of Stations –
Max. Boring Bar Diameter mm –
Tool Size (Cross – Section) mm –
TAILSTOCK
Quill Diameter mm –
Quill Stroke mm –
Accuracy
Positioning Accuracy mm 0.010
Repeatability mm 0.006
Other Data
L X W X H mm 2000 x
1475 x 1975
Weight (Approx) kg 1850

Standard Accessories

  • Roller Type Guideways
  • Ground Ballscrew With Doublenut
  • Foot Switch
  • Axial Tool Holders
  • Boring Tool Holders
  • Hydraulic Chuck With Actuating Cylinder
  • Radial Tool Holder
  • Patrol Light

Optional Accessories

  • Auto Door
  • Stabilizer
  • Chip Conveyor
  • Hydraulic Collet Chuck
  • Bar Feed System
  • All Possible Customization

Control System Accessories

  • RS-232 Serial Interface Port
  • Feed Rate Override
  • Manual Data Input
  • 2 Axis Simultaneous
  • Circular Interpolation
  • Thread Cutting Cycle
  • Electronic Hand Wheel
  • Tool Nose Radius Compensation
  • Constant Surface Speed Control
  • Part Programming Storage And Editing