Linear 8020

Features

  • Roller Guideway
  • Ground Ballscrew with Double Nuts
  • FEM Analyzed Machine Structure
  • Operator Friendly Design
  • Vibration Free Structure
  • Elegant Look of Machine

Technical Specifications

Capacity
Swing Over Bed mm 400
Std Turning Dia. mm 80
Max. Turning Dia. With Limited Length mm 120
Max. Turning Length mm 200
Cross (X Axis) Travel mm 280
Longitudinal (Z Axis) Travel mm 200
Rapid (X & Z Axis) m/min 25
Slide
Ball Screw (Z Axis) mm 25 x 10
LM Guide (Z Axis) mm 25
Ball Screw (X Axis) mm 25 x 10
LM Guide (X Axis) mm 25
Spindle
Spindle Motor Power (30 Min./Cont) kW Siemens 3.7/5.5
Fanuc 3.7/5.5
Spindle Bore mm 40
Spindle Nose A2-4
Chuck Size mm 135
Max. Bar Capacity mm 28
Spindle Speed Range RPM 50-4000
Spindle Inner Size mm Straight Bore Ø 40
Tool Block
No. of Tool For Std. Job Dia. Range 3
Max. Boring Bar Diameter mm Ø 32
Tool Size (Cross – Section) mm 20 x 20
Accuracy
Positioning Accuracy mm 0.010
Repeatability mm 0.006
Other Data
Dimensions (L x W x H) mm 2000 x 1475 x 1975
Weight (Approx.) kg 1850

Standard Accessories

  • Roller Type Guideways
  • Ground Ballscrew With Doublenut
  • Foot Switch
  • Axial Tool Holders
  • Boring Tool Holders
  • Hydraulic Chuck With Actuating Cylinder
  • Radial Tool Holder
  • Patrol Light

Optional Accessories

  • Auto Door
  • Stabilizer
  • Chip Conveyor
  • Hydraulic Collet Chuck
  • Bar Feed System
  • All Possible Customization

Control System Accessories

  • RS-232 Serial Interface Port
  • Feed Rate Override
  • Manual Data Input
  • 2 Axis Simultaneous
  • Circular Interpolation
  • Thread Cutting Cycle
  • Electronic Hand Wheel
  • Tool Nose Radius Compensation
  • Constant Surface Speed Control
  • Part Programming Storage And Editing
error: Content is protected !!