GTC 80
Technical Specifications
Capacity
| Swing Over Bed | mm | 400 |
| Std Turning Dia. | mm | 80 |
| Max. Turning Dia. With Limited Length | mm | 120 |
| Max. Turning Length | mm | 200 |
| Cross (X Axis) Travel | mm | 280 |
| Longitudinal (Z Axis) Travel | mm | 200 |
| Rapid (X & Z Axis) | m/min | 25 |
Slide
| Z-Axis Ball Screw | mm | Dia.25 x 10 pitch |
| LM Guide Z Axis | mm | 25 |
| X-Axis Ball Screw | mm | Dia 25 x 10 pitch |
| LM Guide X-Axis | mm | 25 |
Spindle
| Spindle Motor Power (30 Min./Cont) | kW | Siemens 3.7/5.5 |
| Spindle Bore | mm | 40 |
| Spindle Nose | A2~4 | |
| Chuck Size | mm | 135 |
| Max. Bar Capacity | mm | 28 |
| Spindle Speed Range | RPM | 50-4000 |
| Full Power Speed Range | RPM | 1000-4000 |
| Spindle Inner Size | mm | MT-5 |
Tool Block
| No. of Tool For Std. Job Dia. Range | 3 | |
| Max. Boring Bar Diameter | mm | Ø 32 |
| Tool Size (Cross - Section) | mm | 20 x 20 |
Accuracy
| Positioning Accuracy | mm | 0.010 |
| Repeatability | mm | 0.006 |
Other Data
| Dimensions (L x W x H) | mm | 2000 x 1475 x 1975 |
| Weight (Approx.) | kg | 1850 |
Standard Accessories
- Roller Type Guideways
- Ground Ballscrew With Doublenut
- Foot Switch
- Axial Tool Holders
- Boring Tool Holders
- Hydraulic Chuck With Actuating Cylinder
- Radial Tool Holder
- Patrol Light
Optional Accessories
- Auto Door
- Stabilizer
- Chip Conveyor
- Hydraulic Collet Chuck
- Bar Feed System
- All Possible Customization
Control System Accessories
- RS-232 Serial Interface Port
- Feed Rate Override
- Manual Data Input
- 2 Axis Simultaneous
- Circular Interpolation
- Thread Cutting Cycle
- Electronic Hand Wheel
- Tool Nose Radius Compensation
- Constant Surface Speed Control
- Part Programming Storage And Editing